08.03
2021

How to Plan for a Water Well

Installing a water well on your property takes some serious time, research, consideration, and planning. Adding a water well can significantly increase the value of your property while giving you quick access to clean drinking water. The best way to plan for a new water well is to understand the details and the scope of the job thoroughly. Read on to learn about what exactly goes into planning this large project and how to maximize its potential.

 

Take care of all legal prerequisites

 

Be sure to check with your local government to learn if your water well requires a well permit before drilling it. Reaching out to a well-drilling contractor is another option to learn about the legal requirements in your area. You will need to know what zoning and building laws you must follow and make arrangements accordingly to avoid any legal penalties. Your province may have local codes or regulations that are different from other provinces in the country.

 

Estimate how much water is “enough”

 

You should have a reasonable estimate of your water supply-demand. When drilling a well, it’s vital to ensure there will be enough water to allocate an ample amount to each family member. Avoiding dry holes and low-yielding wells are crucial. If you have a larger family, swimming pool, or warrant higher water consumption, you will require more than the average household. A general rule of thumb is that a home will use approximately 150-300 gallons of water per day for two to four people to meet basic water supply needs.

 

Avoiding disaster with low-yielding wells

 

While it’s not common, some holes may be dry. More often, low-yielding wells will be an issue. Low-yielding wells may be caused by geologic conditions or interference with other wells. Consult with your local drilling contractor as they should know your hometown area the best. They should be able to tell you if the material beneath the ground is suitable for obtaining a good water supply. Another good tip is to chat with your neighbors and ask them about the water quantity and quality in the area.

 

Scouting the perfect spot for your new water well

 

While you may want your water well in one spot, take a tour to determine the best place for drilling on your property. Be sure to avoid land slopes and poorly drained areas whenever possible. Water wells should be in a location that’s easily accessible for regular maintenance, repairs, cleaning, testing, and routine inspections, all of which will probably be necessary at some point. Be sure to remove any shrubs and trees away from the well; they can hinder the installation process. Also, always install water wells far away from septic systems and contaminates to avoid contamination. Placing your well at a higher elevation level than the surrounding areas will help to decrease possible pollution.